Hobo Temperature Probe with 15,2m Lead - TMC50-HD
Product code: TMC50-HD
Hobo Temperature Probe with 15.2m Lead
$169.70
AUD + GST
$186.67
AUD Inc. GST
PT-100 Cryogenic Temperature Probe (2-wire), 2.5 m cable - IC-50116
Product code: IC-50116
The PT-100 Cryogenic temperature probe provides accurate, stable readings with fast response time over a range of -200 to 400 C, and is therefore well suited to extreme low temperature applications.
$251.00
AUD + GST
$276.10
AUD Inc. GST
Flow Meter -Compressed Air-Systems - Steel Pipes (0.5")
Product code: IC-6200-05S
CDI 6200 Flow meters are designed for compressed air systems. The flowmeter clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the display indicates flow directly, with no setup or adjustment.
True TDR-305H - IC-ACC-TDR-305H
Product code: IC-ACC-TDR-305H
Fully Integrated Digital TDR. All electronics in sensor. SDI-12 Output. Low power consumption. 5cm waveguide length. High salinity solution.
True TDR-310H - IC-ACC-TDR-310H
Product code: IC-ACC-TDR-310H
Fully integrated Digital TDR. All electronics in sensor. SDI-12 Output. Low power consumption. Cylindrical shape. 10cm waveguide length.
Durable Immersion Thermocouple Probe for Temperature Meters - K-380
Product code: K-380
The K-380 is a simple to use thermocouple that measures the temperature of liquid, gels or air via an immersion probe.
$21.90
AUD + GST
$24.09
AUD Inc. GST
PCE-TDS 100HSH+ Flow Meter with Thermometer
Product code: PCE-TDS-100HSH-PLUS
Portable handheld clamp-on ultrasonic flow meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes. -Appropriate for pipes or tubes with a diameter measuring from 20 to 108 mm. -Suggested for measuring homogenous liquids that includes different types of oil, gas, and waste water. -Includes the PCE-T 330 temperature data logger.
HOBOnet 60cm soil moisture and temperature sensor
Product code: IC-RXW-GP4-922
The HOBOnet RXW-GP4-922 Multi-Depth Soil Moisture Sensor is a wireless sensor that works with the HOBOnet system to measure soil moisture and soil temperature at multiple depths with a single probe, for fast and easy installation. -Measures soil moisture along the entire length of each probe segment, resulting in the largest volume of influence per measurement section. -60 cm probe length.
1 in stock
True TDR-310S Soil Moisture Sensor
Product code: TDR-310S
This TDR is from the same family of the other Acclima True TDRs, however its rounded form factor allows it to easily attached to a (sched. 40) 1″ PCV pipe and/or be inserted into an access tube as small as 1.25″ (sched. 40 PVC) to be inserted into the soil at a specified depth.
Wireless Sensor with External Temperature Probe
Product code: IC-WTAGEX
Wirelessly monitor temperature with a stainless-steel 3 cm external temperature probe on a 1m cable.
$4.80
AUD + GST
$5.28
AUD Inc. GST
Flow Meter -Compressed Air-Systems -Steel Pipes (1")
Product code: IC-6200-12S
CDI 6200 Flow meters are designed for compressed air systems. The flowmeter clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the display indicates flow directly, with no setup or adjustment.
Flow Meter -Compressed Air-Systems -Steel Pipes (1")
Product code: IC-6200-10S
CDI 6200 Flow meters are designed for compressed air systems. The flowmeter clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the display indicates flow directly, with no setup or adjustment.
Flow Meter -Compressed Air-Systems -Aluminum Pipes (40Mm)
Product code: IC-6200-40M
CDI 6200 Flow meters are designed for compressed air systems. The flowmeter clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the display indicates flow directly, with no setup or adjustment.
Flow Meter -Compressed Air-Systems - Steel Pipes (1.5")
Product code: IC-06200-15S
CDI 6200 Flow meters are designed for compressed air systems. The flowmeter clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the display indicates flow directly, with no setup or adjustment.
Flow Meter -Compressed Air-Systems - Steel Pipes (0.75")
Product code: IC-6200-07S
CDI 6200 Flow meters are designed for compressed air systems. The flowmeter clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the display indicates flow directly, with no setup or adjustment.
Flow Meter -Compressed Air-Systems - Copper Pipes (1.5")
Product code: IC-6200-15C
CDI 6200 Flow meters are designed for compressed air systems. The flowmeter clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the display indicates flow directly, with no setup or adjustment.
Flow Meter -Compressed Air-Systems - Copper Pipes (1")
Product code: IC-6200-10C
CDI 6200 Flow meters are designed for compressed air systems. The flowmeter clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the display indicates flow directly, with no setup or adjustment.
Flow Meter -Compressed Air-Systems - Copper Pipes (0.75")
Product code: IC-6200-07C
CDI 6200 Flow meters are designed for compressed air systems. The flowmeter clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the display indicates flow directly, with no setup or adjustment.
Flow Meter -Compressed Air-Systems - Aluminum Pipes (25Mm)
Product code: IC-6200-25M
CDI 6200 Flow meters are designed for compressed air systems. The flowmeter clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the display indicates flow directly, with no setup or adjustment.
Compressed Air Flow Meter - 40-600 SCFM Sensor - IC-T-CDI-5400-20S
Product code: IC-T-CDI-5400-20Scdi
Effectively monitor compressed air systems with the T-CDI-5400-20S. This flow meter includes two probes, one warmer than the other. This arrangement calculates mass velocity based on heat requirements. Additionally, pipe area data is used to determine flow amounts. This product fits a two-inch steel pipe.
Compressed Air Flow Meter - 16-200 SCFM Sensor - IC-T-CDI-5200-10S
Product code: IC-T-CDI-5200-10S
The T-CDI-5200-10S is a flow meter for compressed air systems. It measures flow by maintaining one probe warmer than the other. It calculates the mass velocity from the amount of heat required, and then calculates the flow on the basis of pipe area. This model fits 1" steel pipes.
CDI6200, Compressed Air using Copper Pipes (1-1.25")
Product code: IC-6200-12C
CDI 6200 Flow meters are designed for compressed air systems. The flowmeter clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the display indicates flow directly, with no setup or adjustment.