Hanna Instruments
Bread and Dough pH Tester - HI981038
Product code: HI981038
HI981038 Bread and Dough pH Tester is designed to measure the pH during baking processes to ensure dough meets the food-hygiene and Hazard Analysis Critical Control Point (HACCP) regulations. - +/- 0.05 pH accuracy. -Conical shaped electrode is ideal to pierce solid and semisolid samples. -Open junction prevents samples from clogging the junction.
$239.40
AUD + GST
$263.34
AUD Inc. GST
1 in stock
pH/ISE and EC/TDS Benchtop Meter - IC-HI5521-02
Product code: IC-HI5522-02
The IC-HI5522 is an advanced research grade, two-channel benchtop pH/ORP/ISE and EC/TDS/Salinity/Resistivity meter. The HI5522 is a two-channel meter that allows for simultaneous measure of pH, ORP, or ISE on one channel and EC, TDS, Salinity, or Resistivity on the other.
$2,289.20
AUD + GST
$2,518.12
AUD Inc. GST
Hardness (40 to 500 mg/L (ppm) Titration-based Chemical Test Kit
Product code: IC-HI3841
The HI3841 is a chemical test kit that measures total hardness as CaCO 3 by titration with EDTA. The HI3841 is supplied complete with all of the reagents and equipment necessary to perform approximately 50 tests. - Range: 40 to 500 mg/L (ppm) - Pre-made reagents for ease of use - All reagents marked with expiration date and lot number for traceability - Manual titration performed with color indicator
$21.60
AUD + GST
$23.76
AUD Inc. GST
Multiparameter meter in case, independent probe pH, EC / turbidity, DO, 4 m cable (Non- GPS) - HI 9829-03042
Product code: HI9829-03042
Professional tool for water quality with independent probe storage Displays up to 12 parameters / Measurement up to 15 parameters.
$6,999.50
AUD + GST
$7,699.45
AUD Inc. GST
Portable pH, high range EC & TDS and Temperature Meter - HI 991301
Product code: HI991301
High Range EC & TDS. The HI 991301 has been designed to offer you pH, conductivity, total dissolved solids and temperature measurements all in a slim, lightweight, portable unit.
$1,009.60
AUD + GST
$1,110.56
AUD Inc. GST
NPK Soil Chemical Test Kit (25 tests each)
Product code: HI3896
The HI3896 is a chemical test kit for the determination of commonly monitored parameters in soil testing. Measure pH and the most important elements for plant growth: nitrogen (N), phosphorus (P), and potassium (K). Includes premade reagents and tools needed to perform up to 25 tests for each parameter.
$139.00
AUD + GST
$152.90
AUD Inc. GST
1 in stock
Free Chlorine Chemical Test Kit - IC-HI3829F
Product code: IC-HI3829F
The HI3829F is a chemical test kit that uses the DPD method to measure free chlorine. The HI3829F is supplied complete with all of the reagents and equipment necessary to perform approximately 50 tests. - Range: 0.0 to 2.0 ppm, Good for 50 tests. - Pre-made reagents for ease of use. - All reagents marked with expiration date and lot number for traceability. - Color comparison cube for simple determination.
$41.20
AUD + GST
$45.32
AUD Inc. GST
HI98103, Checker pH Tester
Product code: HI98103
The pH Checker series supplies users with fast and accurate readings from 0 to 14 pH with a resolution of 0.1 pH
$69.20
AUD + GST
$76.12
AUD Inc. GST
3 in stock
Portable pH, low range EC & TDS and Temperature Meter - HI 991300
Product code: HI991300
Low Range EC & TDS. The HI 991300 has been designed to offer you pH, conductivity, total dissolved solids and temperature measurements all in a slim, lightweight, portable unit.
$1,009.40
AUD + GST
$1,110.34
AUD Inc. GST
HI9810312 HALO2 pH Meter for Beer
Product code: HI9810312
Wireless pH tester for measuring the pH of beer and other related samples. -The pH electrode was built with a titanium body and was specifically designed to provide stable pH measurement for mash, cooled wort, and beer samples. -Built with open-source Bluetooth protocol allows easy integration with the Hanna Lap App and current Laboratory Information Management System (LIMS). -IP65 Water Resistant Protection.
$259.60
AUD + GST
$285.56
AUD Inc. GST
HI9810352 HALO2 pH Meter for Sushi
Product code: HI9810352
Wireless pH tester for measuring the pH of sushi. -The pH electrode was built to provide stable measurement of pH with sushi rice to ensure it meets the food-hygiene and Hazard Analysis Critical Control Point (HACCP) regulations. -Built with open-source Bluetooth protocol allows easy integration with the Hanna Lap App and current Laboratory Information Management System (LIMS). -IP65 Water Resistant Protection.
$259.20
AUD + GST
$285.12
AUD Inc. GST
pH with mV Simulator with a pH Resolution - IC-HI931001
Product code: IC-HI931001
The HI931001 is a portable pH/mV simulator designed to test and calibrate pH and mV (ORP) meters. The output signals correspond to pH values at 25 C to check the span of your pH meter. - With LCD Display. - Simulate output to discover malfunctions. - Battery powered for portability.
$549.40
AUD + GST
$604.34
AUD Inc. GST
Pool Line DiST 2 TDS Tester with HI73302 Probe - IC-HI983024
Product code: IC-HI983024
The HI983024 Pool Line TDS tester is the ideal meter to measure the salt levels in swimming pools, hot tubs, or spas that use salt to generate chlorine by electrolysis. - Provides high accuracy TDS (0.00 to 10.00 ppt). - Lightweight and waterproof. - Displays TDS and Temperature simultaneously.
$109.76
AUD + GST
$120.74
AUD Inc. GST
Pool Line Checker pH Tester with 1271 Electrode - IC-HI981014
Product code: IC-HI981014
The HI981014 Pool Line pH and temperature meter is made for measuring the pH of swimming pool, hot tub, or spa water. This tester keeps things simple with a single button operation for both ON/OFF and Calibration. - An affordable pH meter with many features such as automatic temperature calibration, stability indicator, automatic buffer recognition, etc. - Has a long battery life of approximately 1000 hours. - Replaceable electrode.
$69.80
AUD + GST
$76.78
AUD Inc. GST
Marine Salinity Tester - IC-HI98319
Product code: IC-HI98319
HI98319 is a digital salinity tester designed specifically for saltwater aquariums and displays results in parts per thousand (ppt), Practical Salinity Units (PSU), or specific gravity (S.G.). This waterproof tester uses an amperometric conductivity probe to determine the salt content in the water. This robust tester displays the readings along with temperature on a large LCD.
$159.70
AUD + GST
$175.67
AUD Inc. GST
1 in stock
HI9810432 HALO2 pH Meter for Cosmetic Creams
Product code: HI9810432
Wireless pH tester appropriate for testing cosmetic creams. The pH electrode was specifically designed to provide stable measurement in viscous solutions or samples of low conductivity such as cosmetic creams. Built with open-source Bluetooth protocol allows easy integration with the Hanna Lap App and current Laboratory Information Management System (LIMS). IP65 Water Resistant Protection.
$279.50
AUD + GST
$307.45
AUD Inc. GST
2 in stock
EL-WEM+ WiFi CO2 and Indoor Air Quality Monitor - IC-EL-WEM-PLUS
Product code: IC-EL-WEM-PLUS
The EL-WEM+ CO2 and Indoor Air Quality (IAQ) monitors indoor CO2 levels, temperature, humidity, VOCs, pressure, PM1, PM2.5 and PM10 to help you monitor indoor air quality. Measures all parameters in real-time, rating them according to five levels (Excellent to Inadequate). Visual and audible alarms and SMS alerts, are triggered when any of the measured parameters fall to the two lowest levels. All measured data are uploaded into the Easylog Cloud for convenient access to historical data.
$509.30
AUD + GST
$560.23
AUD Inc. GST
pH Electrode with Clogging Prevention System (CPS) and BNC Connector - IC-HI1048B
Product code: IC-HI1048B
The HI1048B is a glass body, refillable, sleeve junction pH electrode with a BNC connector. This electrode features a double junction reference, Hanna’s Clogging Prevention System (CPS) technology and spherical glass sensing bulb made with general purpose glass. The CPS technology makes this probe ideal for wine, juice or other samples with solids as they contain substances that can clog other types of probes. Has a spherical tip that provides a larger area for contact for faster and more stable readings. Refillable Electrode (3.5M KCl).
$449.90
AUD + GST
$494.89
AUD Inc. GST
Refillable Double Junction pH Electrode with BNC and Pin Connectors - IC-HI1043P
Product code: IC-HI1043P
The HI1043P is a glass body, refillable, double junction pH electrode with a BNC and pin connector. The pin connector is used to enable the CAL Check function of the HI2221, HI2222, and HI2223 benchtop meters. Has a single ceramic junction in the outer reference cell and the pH sensing portion is made with high temperature glass. Designed specifically for hydrocarbons, paints, solvents, high conductivity samples, strong acids, bases, and for applications that require measuring samples in high temperatures. Its a refillable probe using HI7082 3.5M KCl.
$439.00
AUD + GST
$482.90
AUD Inc. GST
Refillable Double Junction pH Electrode with BNC Connector - IC-HI1043B
Product code: IC-HI1043B
The HI1043B is a glass body, refillable, double junction pH electrode with a BNC connector. This electrode has a single ceramic junction in the outer reference cell and the pH sensing portion is made with high temperature glass. This design consideration is ideal for hydrocarbons, paints, solvents, high conductivity samples, strong acids and bases, and for measuring samples at elevated temperatures.
$399.92
AUD + GST
$439.91
AUD Inc. GST
Digital pH/Temp electrode for HI98199 - IC-HI829113
Product code: IC-HI829113
The HI829113 is a digital pH/temperature probe is made for use with the HI98199 portable multiparameter pH, EC, and DO meter. Has a flat tip electrode housed in a titanium metal body. An integrated temperature sensor is located in the tip of the electrode for fast and accurate temperature compensated measurements.
$639.00
AUD + GST
$702.90
AUD Inc. GST
Digital Dissolved Oxygen Probe for HI98199 - IC-HI764103
Product code: IC-HI764103
The HI764103 is a digital dissolved oxygen probe with a built-in temperature sensor for the Hanna HI98199 portable meter. Contains a built-in microchip that stores sensor type, serial number, and calibration information that is automatically detected by the HI98199. Features a silver cathode with a zinc anode, an integrated temperature sensor, and easily replaceable HDPE membrane caps. No warm-up time.
$659.50
AUD + GST
$725.45
AUD Inc. GST
Digital DO probe for edge - IC-HI764080
Product code: IC-HI764080
The HI 764080 is a digital dissolved oxygen electrode with built-in temperature sensor. This ultra-thin, Clark-type polarographic electrode is designed for measuring DO in aqueous solutions and contains a built-in microchip that stores sensor type, serial number, and calibration information. Has a platinum cathode with a silver/silver chloride anode, an integrated temperature sensor, and easily replaceable PTFE membrane caps. With integrated temperature sensor for temperature compensated applications. Designed for use with Hanna’s edge pH/EC/DO meter.
$789.40
AUD + GST
$868.34
AUD Inc. GST
Digital EC probe for Edge - IC-HI763100
Product code: IC-HI763100
The HI 763100 is a digital conductivity electrode with a built-in temperature sensor. The HI 763100 is a potentiometric probe with platinum sensors making it suitable for measuring high or low conductivity ranges. Has a builtin microchip that stores calibration data. For Hanna Edge pH/EC/DO meters.
$789.20
AUD + GST
$868.12
AUD Inc. GST
Digital pH/temperature Flat Tip Electrode - IC-HI14140
Product code: IC-HI14140
The HI14140 has a unique open junction design that resists clogging and the probe’s flat tip makes it ideal for pH measurements of skin, paper, food and various surfaces. This probe features a 3.5 mm connector designed exclusively to be used with Hanna Instruments "edge" series pH meters. Flat Tip for Surface Measurements. Uses low temperature (LT) glass, flat tip bulb, glass body, and open junction with viscolene gel electrolyte. 3.5 mm Connector.
$349.50
AUD + GST
$384.45
AUD Inc. GST
Pool Line pH and mV Simulator - IC-HI9310014
Product code: IC-HI9310014
The HI9310014 is a portable pH/mV simulator designed specifically for testing pH and mV (ORP) meters. It's a great diagnostic tool to test pH/mV meters including process controllers. Connecting the HI9310014 to your meter's input socket, readings can be simulated for a range of measurements. - Simulates from 0 to 14 pH and from -1000 to 1000 mV. - Works on all meters with a BNC connector. - Invaluable diagnostic tool for Service and Maintenance Personnel.
$549.70
AUD + GST
$604.67
AUD Inc. GST
Silver/Sulfide Half-Cell Ion Selective Electrode, Solid State - IC-HI4015
Product code: IC-HI4015
The HI4015 is a solid state, half-cell ion selective electrode (ISE) for the determination of silver (Ag + ) or sulfide (S 2- ) in solution. It is ideal for a variety of applications in water conditioning, environmental monitoring, and industrial processes. Solid state sensor Silver detection from 0.11 to 107,900 mg/L Ag + Sulfide detection from 0.003 to 32,100 mg/L S 2- For use with HI5315 reference half-cell
$1,369.70
AUD + GST
$1,506.67
AUD Inc. GST
Potassium Half-Cell Ion Selective Electrode with Polymer Membrane - IC-HI4014
Product code: IC-HI4014
The HI4014 is a liquid membrane, half-cell ion selective electrode (ISE) with epoxy body for the determination of potassium (K + ) in solution. It is ideal for a variety of applications in wine, agriculture, and water analysis. Liquid membrane sensor Detection from 0.039 to 39,100 mg/L K + For use with HI5315 reference half-cell
$1,679.50
AUD + GST
$1,847.45
AUD Inc. GST
Nitrate Half-Cell Ion Selective Electrode with Polymer Membrane - IC-HI4013
Product code: IC-HI4013
The HI4013 is a liquid membrane, half-cell ion selective electrode (ISE) for the determination of nitrate (NO 3 - ) in solution. It is s ideal for a variety of applications in the food industry, agriculture, and water analysis. - Liquid membrane sensor - Detection from 0.62 to 6,200 mg/L NO3- - For use with HI5315 reference half-cell
$1,719.40
AUD + GST
$1,891.34
AUD Inc. GST
Lead/Sulfate Half-Cell Ion Selective Electrode, Solid State - IC-HI4012
Product code: IC-HI4012
The HI4012 is a solid state, half-cell ion selective electrode (ISE) for the determination of lead (Pb 2+ ) in solution and indicator for sulfate in titrations. It is ideal for a variety of applications in the plating industry and environmental monitoring. - Solid state sensor - Detection from 0.21 to 20,700 mg/L Pb2+ - For use with HI5315 reference half-cell
$1,719.30
AUD + GST
$1,891.23
AUD Inc. GST