SL4023SD Sound Level Meter & SC941 Calibrator Kit (Cert for Meter, SD Card incl)
Product code: IC-SL4023SD-Kit
This kit includes the SL4023SD Class 2 sound level meter and data logger and the SC-941 Sound Level Calibrator for optimal and accurate sound level measurement. (Comes with Traceable Certificate for Meter. along with SD Card - Valued at $129+GST
$799.60
AUD + GST
$879.56
AUD Inc. GST
Graphtec B-563 Input Terminal Block
Product code: B-563
The Graphtec B-563 is a two-wire, 20-channel analogue input terminal block equipped with M3 screw terminals for sensor wiring connections. It supports analogue sensors for voltage and thermocouples, as well as 4-20mA sensors with an external 250-ohm resistor.
$800.00
AUD + GST
$880.00
AUD Inc. GST
Graphtec B-563SL-30 Input Terminal Block
Product code: B-563SL-30
The Graphtec B-563SL-30 is a two-wire, 30-channel analogue input terminal block equipped with screwless terminals for sensor wiring connections. It supports analogue sensors for voltage and thermocouples, as well as 4-20mA sensors with an external 250-ohm resistor.
$950.00
AUD + GST
$1,045.00
AUD Inc. GST
Windscreen For SLM's (Pack Of 10)
Product code: IC-WINDSCREEN
This windscreen is compatible with these products: NSRT_mk3-mk4 NSRTW_mk3-mk4
$85.00
AUD + GST
$93.50
AUD Inc. GST
Convergence Instruments Standard Tripod Adapter - IC-TRIADAPT
Product code: IC-TRIADAPT
This Standard Tripod Adapter is a bracket available for the Noise Sentry RT and the Noise Sentry RT-Wireless.
$41.00
AUD + GST
$45.10
AUD Inc. GST
1 in stock
EasyLog K-TYPE Probe - K-TYPE PROBE 1M5
Product code: K-TYPE-PROBE-1M5
General purpose K-Type probe for use with Lascar Thermocouple data loggers.
$59.10
AUD + GST
$65.01
AUD Inc. GST
8 in stock
Graphtec B-566 expansion base - IC-B-566
Product code: IC-B-566
Graphtec expansion base for GL840 and GL840-WV
$450.00
AUD + GST
$495.00
AUD Inc. GST
Graphtec 0.5 mtr expansion cable - IC-B-567-05
Product code: IC-B-567-05
Graphtec 0.5 meter expansion cable for GL840 and GL840-WV
$200.00
AUD + GST
$220.00
AUD Inc. GST
Convergence Instruments USB Solar Panel - IC-SP002
Product code: IC-SP002
This SP 002 USB Solar Panel allows indefinite operation of our instruments, even in prolonged overcast conditions. Its output voltage is always safe for these instruments.
$169.60
AUD + GST
$186.56
AUD Inc. GST
Solar Radiation Sensor (Silicon Pyranometer) - S-LIB-M003
Product code: S-LIB-M003
The Solar Radiation Smart Sensor is a light sensor (silicon pyranometer) with a measurement range of 0 to 1280 W/m2 over a spectral range of 300 to 1100 nm
$579.00
AUD + GST
$636.90
AUD Inc. GST
5 Watt Solar Panel Power
Product code: SOLAR-5W
This solar panel is suitable for most locations. Includes 45-degree bracket for mast mounting. Suitable for HOBO RX3000 and U30-NRC.
$283.00
AUD + GST
$311.30
AUD Inc. GST
Onset HOBO HRB-2/3AA Replacement Battery for MX2300
Product code: HRB-2/3AA
Replacement lithium 2/3 AA battery for the MX2300 data loggers.
$37.00
AUD + GST
$40.70
AUD Inc. GST
Graphtec B-563SL Input Terminal Block
Product code: B-563SL
The Graphtec B-563SL is a two-wire, 20-channel analogue input terminal block equipped with screwless terminals for sensor wiring connections. It supports analogue sensors for voltage and thermocouples, as well as 4-20mA sensors with an external 250-ohm resistor.
$800.00
AUD + GST
$880.00
AUD Inc. GST
LogTag Protective Case - Logtag-Case
Product code: Logtag-Case
LogTag protective case that protects your LogTag data logger from spills, dust and knocks. This high-impact plastic enclosure is dust and water resistant but designed to minimise thermal lag. Made from high-impact poly-carbonate plastic. Allows you to see alerts and LCD display without removing the case. The high quality silicon seal offers excellent dust and water resistance.
$25.00
AUD + GST
$27.50
AUD Inc. GST
11 in stock
Current Probe - 0554-5607
Product code: 0554-5607
Current probe for measuring the current consumption of compressors with switchable measuring range. Selectable measuring range between 0 and 20 / 200 A. Long cable (cable length 2.9 m) for barrier-free measurements. The fixed 2.9 m long cable enables barrier-free measurements.
$397.00
AUD + GST
$436.70
AUD Inc. GST
Clamp Meter Adapter - 0590-0003
Product code: 0590-0003
The 0590 0003 clamp meter adapter allows you to make non-contact current measurement with the testo 760-2/-3 digital multimeters. The clamp meter adapter is particularly suitable for measurement on tightly packed power cables or conductors with a small diameter. Fully retractable pincer arm; ideal for measurements in tight places. Direct / alternating current measurement up to 400 A AC/DC possible. Display of 1 mV per A.
$277.00
AUD + GST
$304.70
AUD Inc. GST
Door Contact Connection Cable - 0572-2152
Product code: 0572-2152
The 0572-2152 allows you to connect your testo data logger with a standard door contact to record open/close events for doors like in refrigerators.
$40.00
AUD + GST
$44.00
AUD Inc. GST
Mains Unit for Wireless LAN Data Logger - 0572-2020
Product code: 0572-2020
Mains unit for wireless LAN data logger for optional, external power supply of the WiFi data loggers. 1.5 m USB cable Micro USB on power supply Not to be used for connection for PC Use short cable (included)
$66.00
AUD + GST
$72.60
AUD Inc. GST
Battery Kit for MICROW L for -80 C (Long Processes)
Product code: TS18SMWL-80B
Battery Kit for MICROW L for applications that occur in temperatures up to -80 C.
$119.20
AUD + GST
$131.12
AUD Inc. GST
Wall bracket for data loggers - Wall holder for testo 184
Product code: 0554-1841
Using the wall bracket, you can securely attach appropriate data loggers to goods during transport. This enables optimum monitoring of transport conditions. The wall bracket can easily be fixed using adhesive strips.
$32.00
AUD + GST
$35.20
AUD Inc. GST
Wall Bracket for Testo Data Loggers - 0554-1702
Product code: 0554-1702
Use the wall bracket to fix your data logger securely and firmly to walls. Made from ABS plastic; particularly secure thanks to the lock included in delivery.
$46.00
AUD + GST
$50.60
AUD Inc. GST
Clever Logger Temperature Logger with External Probe
Product code: CLX-01-50
Bluetooth temperature logger with probe to measure temperature using the Clever Logger Gateway. With 5m cable.
$153.64
AUD + GST
$169.00
AUD Inc. GST
Deco-cover
Product code: IC-0554-2009
With the deco-cover for testo 160 THL, your exhibits are always the focus. Thanks to the customisable housing cover, you can integrate the WiFi data logger perfectly and discreetly into any exhibition.
$21.00
AUD + GST
$23.10
AUD Inc. GST
AC Power Adapter for the RX3000 & U30
Product code: AC-U30-EU
AC Power adaptor for HOBO RX3000 and U30 Data loggers.
$126.00
AUD + GST
$138.60
AUD Inc. GST
MX2500 Electrode Storage Cap
Product code: MX2500-STORE-CAP
The electrode storage cap is used to protect the pH electrode in the HOBO MX pH Logger, as well as to properly store the electrode in proper pH storage solution (MX2500-STORE-SOLN). The storage cap has the added benefit of being able to be used for field calibrations.
$46.00
AUD + GST
$50.60
AUD Inc. GST
MX2500 Anti-Biofouling Copper Guard
Product code: MX2500-GUARD
The Anti-Biofouling Copper Guard can be used in addition to the standard electrode guard for protection against biofouling during deployment. The anti-biofouling guard uses copper to reduce biofouling, while still allowing proper water flow to the sensor.
$75.00
AUD + GST
$82.50
AUD Inc. GST
MX2500 End Cap
Product code: MX2500-END-CAP
The replacement sensor end cap replaces the original sensor end cap that ships with the HOBO MX pH Logger.
$355.00
AUD + GST
$390.50
AUD Inc. GST
MX2500 Replacement Electrode
Product code: MX2500-ELECTRODE
The replacement pH electrode replaces the original pH electrode that ships with the HOBO MX2501 logger. The electrodes should be replaced after six months of use.
$379.80
AUD + GST
$417.78
AUD Inc. GST
High accuracy 75mm thermistor probe
Product code: EL-MOTE-P-TP-PLUS
This high-accuracy thermistor probe has a 75mm probe barrel and a 3m cable. For use with EL-MOTE-TP+ and EL-MOTE-DTP+ model types.
$159.30
AUD + GST
$175.23
AUD Inc. GST
2 in stock
Sacrificial sensor with bead thermistor, no connector, 3m cable
Product code: IC-T-TEC-T1-Sacrificial
Sacrificial sensor with bead thermistor, no connector, 3m cable Use with T-TEC Terminal connector.
$15.00
AUD + GST
$16.50
AUD Inc. GST