Network Testers
PoE Pro Tester - IC-R158006
Product code: IC-R158006
The PoE Tester is a multifunction tool that identifies the Class of the PoE source, injector type and power available to a PoE device regardless of cable length, cable quality or other factors. Identifies the PoE source, class, IEEE standard and power available during installation, troubleshooting or maintenance. Test results are stored in real-time on the free AnyWARE mobile app and are seamlessly uploaded to AnyWARE Cloud where professional PDF reports are generated. Also detects cabling issues and can troubleshoot devices up to 90W.
$1,369.20
AUD + GST
$1,506.12
AUD Inc. GST
NAVITEK NT PLUS - IC-R151005
Product code: IC-R151005
The new NaviTEK NT Plus is a network tester for troubleshooting and maintenance of active and passive copper networks with touch screen. Has an autotest button that performs a suite of network tests (Ping, DNS, Gateway, Traceroute). Network Probe provides detailed port and network information of each device. Internal memory for 5000 test reports.
$2,259.00
AUD + GST
$2,484.90
AUD Inc. GST
NAVITEK NT Pro Bundle - IC-NTEK-KIT
Product code: IC-NTEK-KIT
This bundle includes the NaviTEK NT Pro for troubleshooting and maintenance of active and passive copper and fiber networks. It includes active remotes and amplifier probe. The NaviTEK NT Pro performs tests for copper cablings and networks with a fiber optic cable interface. Provides PoE/PoE+ detection with load test. Autotest button performs a suite of network tests: Internet connectivity (Ping, DNS, Gateway, Traceroute) and NetScan.
$2,999.40
AUD + GST
$3,299.34
AUD Inc. GST
R164061 FiberTEK III LC Adapter Kit - IC-R164061
Product code: IC-R164061
The multimode R164061 accessory kits allow one-jumper calibration when testing cabling systems with LC connectors. The kits utilize a precision LC adapter for the receive (Rx) port of each FiberTEK III module and a SC-LC test cord for the transmit (Tx) port. One-jumper calibration recommended by most standards for field testing. Procedure is the same for MM and SM testing.
$12,569.90
AUD + GST
$13,826.89
AUD Inc. GST
FiberTEK IV-MM LED and SM Laser Kit - IC-R164010
Product code: IC-R164010
FiberTEK IV combination MM/SM kit with LED MM sources and laser SM sources. FiberTEK IV adapters are used with LanTEK IV for fast and simple certification of high bandwidth single-mode and multimode fiber optic cabling including support for encircled flux testing. Flashes red to warn of light from other sources, green when linked to FiberTEK IV. Red laser light source to visually pinpoint faults and locate fiber ports. Supports all common connector types. Compatible with all LanTEK IV models.
$18,299.50
AUD + GST
$20,129.45
AUD Inc. GST
LanTEK IV-S 3000MHz Cable Certifier (With PL/CL Adapters) - IC-R163009
Product code: IC-R163009
The LanTEK IV-S R163009 is a 3000MHz cable certifier appropriate for Cat 6A/class EA and class FA, Cat 8 and Class I/II testing with Cloud-based data management software. Allows remote testing and viewing of results thanks to VisiLINQ technology that allows users to verfy results even without touching the handsets. Easy to use with an intuitive user interface; conduct a Cat6A test within 7 seconds. Compatible with off-the-shelf patch cords and does not require proprietary cords to operate.
$18,299.30
AUD + GST
$20,129.23
AUD Inc. GST
LanTEK IV-S 500MHz Cable Certifier (With PL/CL Adapters) - IC-R163008
Product code: IC-R163008
The LanTEK IV-S R163008 is a 500MHz cable certifier appropriate for Cat 6A/class EA and class FA, Cat 8 and Class I/II testing with Cloud-based data management software. Allows remote testing and viewing of results thanks to VisiLINQ technology that allows users to verfy results even without touching the handsets. Easy to use with an intuitive user interface; conduct a Cat6A test within 7 seconds. Compatible with off-the-shelf patch cords and does not require proprietary cords to operate.
$16,559.80
AUD + GST
$18,215.78
AUD Inc. GST
R151006 IDEAL Navitek NT Pro with Touchscreen
Product code: IC-R151006
The new NaviTEK NT is a network tester for troubleshooting and maintenance of active and passive copper and fibre networks. Incorporating an improved graphical interface NaviTEK NT allows network technicians to pinpoint and solve network connectivity issues faster than ever before. Subsequently, tests can be saved as pdf reports and shared with colleagues and clients using the free IDEAL AnyWare app.
$2,559.80
AUD + GST
$2,815.78
AUD Inc. GST
IDEAL R171000 Securitest IP CCTV Camera Tester
Product code: IC-R171000
SecuriTEST IP is an installation and troubleshooting tester for digital/IP, HD coax and analogue CCTV camera systems. With a single tester that can power, configure and document, SecuriTEST IP increases productivity from start to finish. Supply power to cameras via PoE/PoE+ (Power over Ethernet) or standard 12V DC power using its internal Li-Ion battery, eliminating the need for external power adapters and injectors.
$1,699.20
AUD + GST
$1,869.12
AUD Inc. GST
IDEAL R156006 SignalTEK CT with Touchscreen
Product code: IC-R156006
The SignalTEK CT allows you to generate PDF test reports that prove installed links run at Gigabit Ethernet transmission rates.For installers, this means having a cost-effective way to demonstrate that the copper cabling was installed correctly and is capable of supporting Ethernet applications.
$2,859.00
AUD + GST
$3,144.90
AUD Inc. GST
XC5090 Network Cable Tracer
Product code: XC5090
This tone generator is a highly practical network installation and troubleshooting tool, which features a single/multi tone signal. - 140mm long signal and modular leads - Appropriate as a diagnostic and repair tool for network cables.
$89.90
AUD + GST
$98.89
AUD Inc. GST
TM-904 Fibre Fault Locator
Product code: IC-TM-904
The Tenmars TM-904 Flbre Fault Locator is compatible with 2.5mm universal Ferrule connector (FC) for visually identifies and locates faults in fibre optic cabling.
$459.00
AUD + GST
$504.90
AUD Inc. GST
TM-903 Multimedia Cable Tester
Product code: IC-TM-903
The Tenmars TM-903 Multimedia Cable Tester is a hand-held test instrument that lets you verify and troubleshoot LAN cables. Displays graph wire-map, opens, shorts, miss wires, split pairs and the remote ID number, all on one screen.
$359.70
AUD + GST
$395.67
AUD Inc. GST
IDEAL CAT6A Feed-Thru Modular Plugs (50 Pack)
Product code: IC-85-385
The IDEAL Electrical 85-385 CAT6A/6 RJ-45 Feed-Thru Modular Plugs (Card of 50) are single piece 8P8C RJ-45 connectors designed to work with cable conductors ranging from #22 to #24 AWG solid with an overall diameter of 0.040 in. to 0.048 in. per conductor. For insulated conductors of 0.040 in. to 0.048 in. diameter. The single piece Feed-Thru design makes it easier to deal with twisting cables with large conductors. Card of 50.
$69.50
AUD + GST
$76.45
AUD Inc. GST
Amprobe AT-6020 Advanced Wire Tracer Kit
Product code: IC-AT-6020
Amprobe's newest wire tracer combines a Receiver and powerful Transmitter to locate energized and de-energized wires, breakers, and fuses without having to disconnect any equipment. The Receiver features four tracing modes optimized for a range of applications. Its fully automatic breaker tracing capability saves time and eliminates the confusion of multiple false positives by detecting the highest recorded signal in a breaker or fuse.
$1,767.00
AUD + GST
$1,943.70
AUD Inc. GST
Amprobe AT-6010 Advanced Wire Tracer Kit
Product code: IC-AT-6010
Easily and accurately locate wires, breakers, and fuses with the AT-6010 Advanced Wire Tracer. When the Transmitter is connected to the circuit (Energized or De-energized, up to 600 V AC/DC in Category I through Category III electrical environments), the Receiver easily detects the transmitted signal in the wires or cables behind walls, ceilings and floors.
$1,166.00
AUD + GST
$1,282.60
AUD Inc. GST
GbE Fibre Kit SX, 850nm - IC-MGKSX1
Product code: IC-MGKSX1
IDEAL GbE Fibre Kit 1000BASE-SX Fibre Kit, 850nm Multimode
$369.00
AUD + GST
$405.90
AUD Inc. GST
GbE Fibre Kit LX, 1310nm - IC-MGKLX2
Product code: IC-MGKLX2
IDEAL GbE Fibre Kit 1000BASE-LX Fibre Kit, 1320nm Singlemode
$469.30
AUD + GST
$516.23
AUD Inc. GST
IDEAL 85-371 CAT5E Feed-Thru RJ45 Modular Plugs 50PK
Product code: IC-85-371
The IDEAL 85-371 Cat5e RJ-45 Modular Plugs feature an open-end feed-thru design that makes connector to cable assembly easy and fast. It also allows verifying conductor order before crimping. These 8P8C plugs feature 50 micro-inch gold plating on contact mating area that provides secure connectivity. They are used with the IDEAL FT-45 crimping tool (30-495) for Cat5e, 100 ohms balanced twisted pair 100 MHz cables. The crimper ensures trimming wires flush with the end-face of the connector.
$139.90
AUD + GST
$153.89
AUD Inc. GST
GbE Fibre Kit ZX, 1550nm - IC-MGKZX3
Product code: IC-MGKZX3
IDEAL GbE Fibre Kit 1000BASE-ZX Fibre Kit, 1550nm Singlemode
$1,199.80
AUD + GST
$1,319.78
AUD Inc. GST