Building Material & Timber Moisture Meters Accessories
Hygro i Hole Liners - 50 liners and caps - IC-RHHL50
Product code: IC-RHHL50
50 x Hole Liners used with Tramex Hygro-i relative humidity probes for performing ASTM F2170
$245.454
AUD + GST
$270.00
AUD Inc. GST
Straight Insulated Pins - max penetration 36mm (Pack of 10) - SP52
Product code: SP52
Tramex Hammer Probe Replacement Pins (Pack of 10) - max penetration 36mm
$140.909
AUD + GST
$155.00
AUD Inc. GST
Hygro i Probe Pack of 3 - IC-HiPP3
Product code: IC-HiPP3
3 Pack of Hygro-I Probe for with the CMEXPert or MRHIII
$527.272
AUD + GST
$580.00
AUD Inc. GST
Hygro i Probe Pack of 12 - IC-HiPP12
Product code: IC-HiPP12
12 Pack of Hygro-I Probe for with the CMEXPert or MRHIII
$1,677.272
AUD + GST
$1,845.00
AUD Inc. GST
Hygro i Hole Liners - 100 liners and caps - IC-RHHL100
Product code: IC-RHHL100
100 x Hole Liners used with Tramex Hygro-i relative humidity probes for performing ASTM F2170
$350.00
AUD + GST
$385.00
AUD Inc. GST
Stackable Probe Extensions 10 pk - CMMISSTK10PK
Product code: CMMISSTK10PK
Stackable Probe Extensions for PosiTector CMM IS, 10 pk. Each stackable extension adds 1 cm effective length to the PosiTector CMM IS probe.
$46.00
AUD + GST
$50.60
AUD Inc. GST
CMM IS Replacement Fin 16 pk - CMMISFIN16PK
Product code: CMMISFIN16PK
16 pack of replacement fins for the PosiTector CMM IS.
$269.00
AUD + GST
$295.90
AUD Inc. GST
CMM IS Extraction Tool - CMMISTOOL3PK
Product code: CMMISTOOL3PK
Replacement extraction tool for use with the PosiTector CMM IS, 3 pack.
$29.00
AUD + GST
$31.90
AUD Inc. GST
CMM IS Salt Solution 10 Pack - CMMISSS10PK
Product code: CMMISSS10PK
A 10 pack of the Salt Solution for use with the PosiTector CMM IS.
$59.70
AUD + GST
$65.67
AUD Inc. GST
CMM IS Replacement Fin - CMMISFIN4PK
Product code: CMMISFIN4PK
4 pack of replacement fins for the PosiTector CMM IS.
$79.90
AUD + GST
$87.89
AUD Inc. GST
CMM IS Expansion 4 Pack - CMMIS4PK
Product code: CMMIS4PK
Expansion pack includes 4 each CMM IS probes, calibration check chambers, saturated salt solutions and caps plus 40 coin cell batteries. Use with the free PosiTector app to analyse and report data.
$889.10
AUD + GST
$978.01
AUD Inc. GST
PosiTector CMM IS Caps 4 pk - CMMISCAP4PK
Product code: CMMISCAP4PK
4x Replacement caps for use with the PosiTector CMM IS.
$119.30
AUD + GST
$131.23
AUD Inc. GST
CMM IS Expansion 1 Pack - CMMIS1PK
Product code: CMMIS1PK
This expansion pack includes an additional CMM IS probe, calibration check chamber, saturated salt solution and cap plus 2 coin cell batteries.
$229.90
AUD + GST
$252.89
AUD Inc. GST
Defelsko CMM IS Complete Kit - CMMISKITC
Product code: CMMISKITC
The CMM Complete Kit for use with the Positor CMM that includes all the probes and accessories for its operation. Consists of 5 each CMM IS probes, saturated salt solutions, calibration check chambers and caps. Includes probes that measure relative humidity and temperature in conformance with ASTM F2170. Use with the free mobile app guide users through the ASTM F2170 documentation criteria. View & record readings wirelessly with your smart phone Combined sleeve and probe design simplifies the installation process and does not require consumables.
$1,219.10
AUD + GST
$1,341.01
AUD Inc. GST
CMM IS Batteries (10) - CMMISBAT
Product code: CMMISBAT
Replacement coin cell batteries for use with the PosiTector CMM IS.
$35.00
AUD + GST
$38.50
AUD Inc. GST
CMM IS Expansion 16 Pack - CMMIS16PK
Product code: CMMIS16PK
Expansion pack includes 16 each CMM IS probes, calibration check chambers, saturated salt solutions and caps plus 40 coin cell batteries. Use with the free PosiTector app to analyse and report data.
$3,429.30
AUD + GST
$3,772.23
AUD Inc. GST
PosiTector CMM IS Caps 16 pk - CMMISCAP16PK
Product code: CMMISCAP16PK
Replacement caps for use with the PosiTector CMM IS.
$359.80
AUD + GST
$395.78
AUD Inc. GST
Defelsko CMM IS Pro Kit - CMMISKITP3
Product code: CMMISKITP3
The CMM Professional Kit is for use with the Positor CMM that includes all the probes and accessories for its operation. Consists of 5 each CMM IS probes, saturated salt solutions, calibration check chambers and caps. Includes probes that measure relative humidity and temperature in conformance with ASTM F2170. Use with the free mobile app guide users through the ASTM F2170 documentation criteria. View & record readings wirelessly with your smart phone or PosiTector DPM Advanced gauge Pro kit includes PosiTector DPM3 Advanced gauge
$3,089.10
AUD + GST
$3,398.01
AUD Inc. GST
Defelsko CMM IS Basic Kit - CMMISKITB
Product code: CMMISKITB
Basic Kit for use with the Positor CMM that includes all the probes and accessories for its operation. Consists of 3 each CMM IS probes, saturated salt solutions, calibration check chambers and caps. Includes probes that measure relative humidity and temperature. Use with the free PosiTector app to analyse and report data and send them to your CMM. Probe remains on and broadcasting via Bluetooth for up to three weeks. Kit also includes extraction tool, tape measure and ten coin cell batteries.
$699.30
AUD + GST
$769.23
AUD Inc. GST
PosiTest CMM Telescopic Extender - CMMEXT
Product code: CMMEXT
This lightweight device increases the utility of the PosiTest CMM allowing for quick and easy concrete moisture measurements on large surfaces without the need to bend or kneel. For use with the PosiTest CMM Concrete Moisture Meter. Includes a secure ¼”-20 threaded mounting point. Ergonomically measures concrete moisture in slabs without the need to bend or kneel. Ideal for quickly measuring and recording concrete moisture measurements on a large surface.
$89.40
AUD + GST
$98.34
AUD Inc. GST
Tapered Uninsulated - max penetration 14mm - TP30
Product code: TP30
Pack of 10 tapered, non-insulated spare 14mm pins for hand held, heavy duty pin probe HH14TP30 & HH14TP30B.
$90.909
AUD + GST
$100.00
AUD Inc. GST
Straight Insulated Pins - max penetration 72mm (Pack of 2) - SP90
Product code: SP90
Tramex Hammer and handheld Electrode Replacement Pins (Pack of 2) - max penetration 90mm.
$80.909
AUD + GST
$89.00
AUD Inc. GST
Straight Insulated - max penetration 175mm - IC-SP200
Product code: IC-SP200
Tramex Hammer and handheld Electrode Replacement Pins (Pack of 2) - max penetration 72mm
$90.00
AUD + GST
$99.00
AUD Inc. GST
SET WLW hammer (ram electrode) incl. BNC cable, with measuring tips and plastic case
Product code: IC-12846
SET WLW hammer (ram electrode) incl. BNC cable, with measuring tips and plastic case
$569.40
AUD + GST
$626.34
AUD Inc. GST
M 6 stick-in electrode pairs - IC-3700
Product code: IC-3700
The M 6 stick-in electrode pairs are used together with other active probes used in measuring the moisture of hard building materials. These electrodes ensure that there are enough pins that can be used, especially in bulkier materials.
$110.00
AUD + GST
$121.00
AUD Inc. GST
M 25-100 brush electrode pair - IC-3740
Product code: IC-3740
The M 25-100 brush electrodes are used to ensure optimum contact between the hydromette instruments and the material being tested. These electrodes are bored into the material allowing the hydromette meters to measure 30 cm more into the tested material.
$160.00
AUD + GST
$176.00
AUD Inc. GST
M 20 drive-in electrode - IC-3300
Product code: IC-3300
The drive-in electrode M 20 is designed to be used with all hydromette BL instruments used for in-depth measuring of moisture in soft timbers up to 50 mm.
$100.00
AUD + GST
$110.00
AUD Inc. GST
M 18 ram-in electrode - IC-3500
Product code: IC-3500
The Ram-in electrode M 18 is designed to be used with all hydromette BL instruments used for in-depth measuring of moisture in hard timbers up to 180 mm.
$320.909
AUD + GST
$353.00
AUD Inc. GST
$204.545
AUD + GST
$225.00
AUD Inc. GST
BL2 insertion probe for wood chips, 1 meter length, with exchangeable measuring head
Product code: IC-12518
BL2 insertion probe for wood chips, 1 meter length, with exchangeable measuring head, for determination of water content of wood chips, wooden pellets, shredded olive stones and sawdust.
$759.90
AUD + GST
$835.89
AUD Inc. GST