Environment Meters
HI99301 EC/TDS/Temperature Meter
Product code: IC-HI99301
The HI99301 is a rugged, portable EC/TDS and temperature meter housed in a case rated for IP67 conditions. - Supplied with a two-ring conductivity probe to allow for high range EC measurements 0.00 to 20.00 mS/cm) and TDS (0.00 to 10.00 ppt). - With Automatic Temperature Compensation. - Users are able to adjust the temperature correction coefficient and TDS factor.
$389.70
AUD + GST
$428.67
AUD Inc. GST
HI99300 EC/TDS/Temperature Meter
Product code: IC-HI99300
The HI99300 is a rugged, portable EC/TDS and temperature meter housed in a case rated for IP67 conditions. - Supplied with a two-ring conductivity probe to allow for low range EC measurements (0 to 3999 uS/cm) and TDS (0 to 2000 ppm). - With Automatic Temperature Compensation. - Users are able to adjust the temperature correction coefficient and TDS factor.
$389.10
AUD + GST
$428.01
AUD Inc. GST
HI8734 TDS Meter
Product code: IC-HI8734
The HI8734 is a rugged, portable TDS meter designed for the water conditioning industry, particularly in the softening, demineralization, reverse osmosis, and drinking water applications. - M easurement ranges from 0.0 mg/L to 19.99 g/L with a ±1% FS accuracy. - TDS readings are adjusted with manual temperature compensation.
$889.50
AUD + GST
$978.45
AUD Inc. GST
Dissolved oxygen probe for HI5421 - IC-HI76483
Product code: IC-HI76483
The HI76483 Clark-Type Polarographic probe measures a wide range of dissolved oxygen from 0.0 to 600% saturation and 0.00 to 90.00 mg/L (ppm). - Has a slim design measuring only 12 mm in diameter and has a built-in thermistor temperature sensor. - For use with the HI5421 Laboratory Research Grade Benchtop Dissolved Oxygen and BOD Meter.
$899.70
AUD + GST
$989.67
AUD Inc. GST
Galvanic Dissolved Oxygen Probe (With 4 Meter Cable)
Product code: IC-HI76409-4
The HI76409 is a galvanic dissolved oxygen probe for Hanna’s HI9147 portable dissolved oxygen meter. - Contains a pure silver cathode and a zinc anode with integrated temperature sensors. - Uses Screw-on Pre-tensioned Membranes. - Integrated Temperature Sensor.
$429.80
AUD + GST
$472.78
AUD Inc. GST
Galvanic Dissolved Oxygen Probe (With 10 Meter Cable)
Product code: IC-HI76409-10
The HI76409 is a galvanic dissolved oxygen probe for Hanna’s HI9147 portable dissolved oxygen meter. - Contains a pure silver cathode and a zinc anode with integrated temperature sensors. - Uses Screw-on Pre-tensioned Membranes. - Integrated Temperature Sensor.
$559.10
AUD + GST
$615.01
AUD Inc. GST
Polarographic Dissolved Oxygen Probe with Protective Sleeve (With 10 Meter Cable) - IC-HI764073
Product code: IC-HI764073-10
The HI764073 is a spare polarographic dissolved oxygen probe for use with the HI98193 portable dissolved oxygen meter. - Comes with a protective sleeve to endure any environment with the HI98193. - The sensitive PTFE membrane can be changed in seconds making it ideal for use in the field. - With integrated temperature sensor.
$809.48
AUD + GST
$890.43
AUD Inc. GST
Polarographic Dissolved Oxygen Probe with Protective Sleeve - IC-HI764073
Product code: IC-HI764073
The HI764073 is a spare polarographic dissolved oxygen probe for use with the HI98193 portable dissolved oxygen meter. - Comes with a protective sleeve to endure any environment with the HI98193. - The sensitive PTFE membrane can be changed in seconds making it ideal for use in the field. - With integrated temperature sensor.
$589.96
AUD + GST
$648.96
AUD Inc. GST
Standard Polarographic DO Probe (With 4 Meter Cable with Protective Sheath)
Product code: IC-HI76407-4F
The HI76407 is a standard polarographic dissolved oxygen probe for Hanna’s benchtop and portable dissolved oxygen meters. This model comes with a 4 meter cable with protective sheath. - Contains a platinum cathode and silver anode and is for use with HI76407A/P PTFE membrane caps. - Tapered design makes it ideal for BOD measurements in bottles. - Specifically used with Hanna HI9146 to endure harsher testing conditions.
$439.50
AUD + GST
$483.45
AUD Inc. GST
Standard Polarographic Dissolved Oxygen Probe (With 4 Meter Cable) - IC-HI76407-4
Product code: IC-HI76407-4
The HI76407 is a standard polarographic dissolved oxygen probe for Hanna’s benchtop and portable dissolved oxygen meters. This model comes with a 4 meter cable. - Contains a platinum cathode and silver anode and is for use with HI76407A/P PTFE membrane caps. - Tapered design makes it ideal for BOD measurements in bottles. - Specifically used with Hanna HI9142, HI9143, HI9145, HI9141, HI91410.
$429.90
AUD + GST
$472.89
AUD Inc. GST
Standard Polarographic DO Probe (With 20 Meter Cable and Protective Sheath) - IC-HI76407-20F
Product code: IC-HI76407-20F
The HI76407 is a standard polarographic dissolved oxygen probe for Hanna’s benchtop and portable dissolved oxygen meters. This model comes with a 20 meter cable and protective sheath. - Contains a platinum cathode and silver anode and is for use with HI76407A/P PTFE membrane caps. - Tapered design makes it ideal for BOD measurements in bottles. - Specifically used with Hanna HI9146 to endure harsher testing conditions.
$789.10
AUD + GST
$868.01
AUD Inc. GST
Standard Polarographic Dissolved Oxygen Probe (With 20 Meter Cable)
Product code: IC-HI76407-20
The HI76407 is a standard polarographic dissolved oxygen probe for Hanna’s benchtop and portable dissolved oxygen meters. This model comes with a 20 meter cable. - Contains a platinum cathode and silver anode and is for use with HI76407A/P PTFE membrane caps. - Tapered design makes it ideal for BOD measurements in bottles. - Specifically used with Hanna HI2400.
$779.60
AUD + GST
$857.56
AUD Inc. GST
Standard Polarographic Dissolved Oxygen Probe (With 2 Meter Cable) - IC-HI76407-2
Product code: IC-HI76407-2
The HI76407 is a standard polarographic dissolved oxygen probe for Hanna’s benchtop and portable dissolved oxygen meters. - Contains a platinum cathode and silver anode and is for use with HI76407A/P PTFE membrane caps. - Tapered design makes it ideal for BOD measurements in bottles. - Specifically used with Hanna HI2400.
Standard Polarographic DO Probe (With 10 Meter Cable and Protective Sheath)
Product code: IC-HI76407-10F
The HI76407 is a standard polarographic dissolved oxygen probe for Hanna’s benchtop and portable dissolved oxygen meters. This model includes a protective sheath. - Contains a platinum cathode and silver anode; for use with HI76407A/P PTFE membrane caps. - Ideal for BOD measurements. - Compatible with Hanna HI9146 to endure harsher testing conditions.
$569.20
AUD + GST
$626.12
AUD Inc. GST
Standard Polarographic Dissolved Oxygen Probe (With 10 Meter Cable) - IC-HI76407-10
Product code: IC-HI76407-10
The HI76407 is a standard polarographic dissolved oxygen probe for Hanna’s benchtop and portable dissolved oxygen meters. - Contains a platinum cathode and silver anode; for use with HI76407A/P PTFE membrane caps. - Ideal for BOD measurements. - Compatible with Hanna HI9142, HI9143, HI9145, HI9141, HI91410 meters.
$559.40
AUD + GST
$615.34
AUD Inc. GST
Optical Dissolved Oxygen Meter (With 10 Meter Cable) - IC-HI98198-10
Product code: IC-HI98198-10
The HI98198 measures dissolved oxygen levels in water using enhanced optical dissolved oxygen technology to ensure high levels of accuracy. - With built-in methods and calculations for the measurement of Biological Oxygen Demand (BOD), Oxygen Uptake Rate (OUR), and Specific Oxygen Uptake Rate (SOUR), there is no need for manual conversions
$3,229.00
AUD + GST
$3,551.90
AUD Inc. GST
Waterproof Portable Handheld Dissolved Oxygen & BOD Meter (With 10 Meter Cable)
Product code: IC-HI98193-10
The HI98193 is a rugged, portable dissolved oxygen (DO) meter designed for demanding applications. - Supplied with the HI764073 polarographic dissolved oxygen probe. This probe uses preformed PTFE membrane caps that are field replaceable. - Waterproof meter and complies with IP67 standards and measures DO, barometric pressure, BOD and temperature. - Also Supplied complete with all accessories to perform a DO measurement with carrying case.
$1,489.40
AUD + GST
$1,638.34
AUD Inc. GST
Portable Galvanic Dissolved Oxygen Meter (With 10 Meter Cable) - IC-HI9147-15
Product code: IC-HI9147-15
The HI9147 is a rugged, water-resistant dissolved oxygen (DO) meter designed for aquaculture applications. - Uses galvanic sensor technology where the electrodes’ potential difference drives the reaction, requiring no external voltage. - Comes with a galvanic probe with 15 meter cable, HDPE membrane caps, electrolyte fill solution, a protective shield, and sturdy carrying case.
$1,199.70
AUD + GST
$1,319.67
AUD Inc. GST
Portable Galvanic Dissolved Oxygen Meter (With 10 Meter Cable) - IC-HI9147-10
Product code: IC-HI9147-10
The HI9147 is a rugged, water-resistant dissolved oxygen (DO) meter designed for aquaculture applications. - Uses galvanic sensor technology where the electrodes’ potential difference drives the reaction, requiring no external voltage. - Comes with a galvanic probe with 10 meter cable, HDPE membrane caps, electrolyte fill solution, a protective shield, and sturdy carrying case.
$1,099.60
AUD + GST
$1,209.56
AUD Inc. GST
Portable Galvanic Dissolved Oxygen Meter (With 4 Meter Cable) - IC-HI9147-04
Product code: IC-HI9147-04
The HI9147 is a rugged, water-resistant dissolved oxygen (DO) meter designed for aquaculture applications. - Uses galvanic sensor technology where the electrodes’ potential difference drives the reaction, requiring no external voltage. - Comes with a galvanic probe with 4 meter cable, HDPE membrane caps, electrolyte fill solution, a protective shield, and sturdy carrying case.
$989.60
AUD + GST
$1,088.56
AUD Inc. GST
Portable Dissolved Oxygen Meter (With 10 Meter Cable) - IC-HI9146-10
Product code: IC-HI9146-10
The HI9146 is a rugged, portable dissolved oxygen (DO) meter designed to provide laboratory precision and accuracy under harsh environmental and industrial conditions. - Offers many features including automatic calibration, with auto-endpoint detection, and compensation for temperature, salinity, and altitude. - Includes polarographic probe with 10m cable, PTFE membrane caps, electrolyte fill solution, and rugged carrying case. - Good Laboratory Practice (GLP) compliant.
$1,299.60
AUD + GST
$1,429.56
AUD Inc. GST
Portable Dissolved Oxygen Meter (With 4 Meter Cable) - IC-HI9146-04
Product code: IC-HI9146-04
The HI9146 is a rugged, portable dissolved oxygen (DO) meter designed to provide laboratory precision and accuracy under harsh environmental and industrial conditions. - Offers many features including automatic calibration, with auto-endpoint detection, and compensation for temperature, salinity, and altitude. - Includes polarographic probe with 4m cable, PTFE membrane caps, electrolyte fill solution, and rugged carrying case. - Good Laboratory Practice (GLP) compliant.
$1,179.80
AUD + GST
$1,297.78
AUD Inc. GST
Manual Calibration Dissolved Oxygen Meter - IC-HI9142
Product code: IC-HI9142
The HI9142 is a rugged, portable, waterproof dissolved oxygen (DO) meter, with replaceable polytetrafluoroethylene (PTFE) membrane caps and protective shield, designed to provide reliable measurements under harsh environmental conditions. - Includes complete with polarographic probe and replaceable PTFE membrane caps. - Waterproof. - Manual one or two point calibration at 100% and automatic calibration in zero oxygen solution.
$989.80
AUD + GST
$1,088.78
AUD Inc. GST
Research Grade pH/ISE/ORP Meter with CAL Check - IC-HI5222-02
Product code: IC-HI5222-02
The HI5222 is an advanced research grade dual channel benchtop pH/ISE/mV meter that is completely customizable with a large color LCD, capacitive touch keys, and USB port for computer connectivity. - Offers several features as expected from a research grade instrument such as 5 point calibration, selectable resolution, comprehensive GLP, etc. - Includes Hanna's CAL Check ™ Probe Diagnostics. - Has two input channels that can be used for pH, ORP and ISE electrodes.
$2,069.00
AUD + GST
$2,275.90
AUD Inc. GST
Edge blu Bluetooth Smart pH Electrode and Meter - IC-HI2202-02
Product code: IC-HI2202-02
The HI2202-02 Edge Blu is a wireless pH bench meter with a Bluetooth pH electrode that connects directly to your smart device. - U ses the Hanna HALO Bluetooth pH electrodes with a built-in temperature sensor to send measurement data wirelessly to the meter or a compatible Apple or Android device running the Hanna Lab App. - Edge blu features advanced pH electrode diagnostics to ensure worry free measurements, including Hanna's CAL Check feature.
$889.50
AUD + GST
$978.45
AUD Inc. GST
Pool Line ORP/pH/Temperature Tester - IC-HI981214
Product code: IC-HI981214
The HI981214 Pool Line Combo pH/ORP meter is made for measuring pH and ORP of a swimming pool, hot tub, or spa water. - Gives you highly accurate measurements of pH, ORP and temperature. No more switching between meters for your routine measurements. - Waterproof with replaceable electrode.
$329.70
AUD + GST
$362.67
AUD Inc. GST
Pool Line ORP/Temperature Tester - IC-HI981204
Product code: IC-HI981204
The HI981204 Pool Line ORP and temperature meter is made for measuring the oxidation (chlorine) level of swimming pool, hot tub, or spa water. This lightweight, waterproof tester offers high accuracy ORP, and temperature measurements in a single handheld unit. - 1 mV resolution and ±2 mV accuracy. - Replaceable ORP Electrode. - Simultaneous display of ORP & temperature.
$389.10
AUD + GST
$428.01
AUD Inc. GST
Pool Line Waterproof Pocket pH Tester (0.1 Resolution) - IC-HI981074
Product code: IC-HI981074
THe HI981074 Pool Line pH and temperature meter with automatic temperature compensation (ATC) measures the pH of swimming pool, hot tub, or spa water. Accurate pH levels ensure chlorine is predominately in the more effective form. - Waterproof and floats in water. - Automatic calibration. - Displays pH and Temperature Simultaneously.
$99.80
AUD + GST
$109.78
AUD Inc. GST
Chocolate Checker pH Tester - IC-HI981039
Product code: IC-HI981039
The HI981039 Foodcare Chocolate pH is an advanced pH meter designed for the measurement of the pH during the chocolate making process. - Removable outer junction sleeve for easy cleaning. - Conical tip for measurements in semisolids and emulsions. - Automatic Temperature Compensation (ATC).
$239.80
AUD + GST
$263.78
AUD Inc. GST
Pool Line Checker Plus pH Tester - IC-HI981004
Product code: IC-HI981004
The HI981004 Pool Line pH and temperature meter is made for measuring the pH of swimming pool, hot tub, or spa water. This tester keeps things simple with a single button operation for both ON/OFF and Calibration. - pH range of 0.00 to 14.00 pH. - Automatic calibration. - Replaceable pH probe.
$99.40
AUD + GST
$109.34
AUD Inc. GST