Flow Meters
Handheld flow meter kit for water & air speed (Soft bag) - IC-FL-KIT-2
Product code: IC-FL-KIT2
The Flowatch Kit is designed a flowmeter-thermometer kit designed to measure almost any liquid or gasesous medium using the two included air and water impellers.
$809.10
AUD + GST
$890.01
AUD Inc. GST
Handheld flow meter kit for water & air speed (Hard Case) - IC-FL-KIT-1
Product code: IC-FL-KIT1
The Flowatch Kit is designed a flowmeter-thermometer kit designed to measure almost any liquid or gaseous medium using the two included air and water impellers.
$889.00
AUD + GST
$977.90
AUD Inc. GST
Flow Detective - IC-CMLFlowdetective
Product code: IC-CMLFlowdetective
The Flow Detective is a digital flow meter for the accurate calibration of personal sampling pumps and other equivalent devices. This is the standard model for medium flow air sampling pumps (0.5 to 5L/min).
$2,930.00
AUD + GST
$3,223.00
AUD Inc. GST
Sigfox-Ready Thermal mass Gas Flowmeter
Product code: WSSFC-TMF128-G-DN20
WSSFC-TMF128 is a Sigfox-Ready Thermal mass gas flow meter designed especially for Oxygen, Nitrogen, or Compressed Air flow measurement. -Delivers accuracy better than 3% of reading plus 0.5% of span. -Can be configured via Sigfox downlink or RS485 Modbus RTU. -Compatible with RC1, RC2, and RC4 regions.
Ultrasonic Flow Meter PCE-TDS 200+ SL
Product code: PCE-TDS-200-PLUS-SL
The PCE-TDS 200 flow meter ultrasonic flowmeter has a measuring range of +/- 32 m/s. With an accuracy of +/- 1.5 % f.s. for a pipe diameter of DN of more than or equal to 50, +/- 3.5 % f.s. for a pipe diameter of DN less than 50 and a reproducibility of +/- 0.5 % f.s. Has graphical display that shows whether the sensors are properly installed and positioned correctly for reliable measurements. Includes with data logging features with 32 GB data memory. Comes with two flow sensors and two thermocouple sensors.
$5,679.70
AUD + GST
$6,247.67
AUD Inc. GST
F-40250LN-6 Acrylic Flow Meter
Product code: IC-40250LN-6
Acrylic flow meter with F/NPT adapters with high grade Viton o-ring seals and aluminum “stress ring” thread supports. -0.025 to 0.250 GPM/0.1 to 1.0 LPM -Appropriate for direct sunlight applications.
$649.20
AUD + GST
$714.12
AUD Inc. GST
F-44500LK-8 K Polysulfone Compact Flow Meter with Inline Mounting
Product code: IC-F-44500LK-8
The F-44500LK-8 flow meter is made specifically for highly corrosive substances. Made from polysulfone to resist high temperatures and pressure. These meters are compact, designed to fit into tight installations. Flows from 0.5 to 5.0 GPM (1.8 to 18.0 LPM). With 1/2" pipe size, Hastelloy float material. Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable.
$439.30
AUD + GST
$483.23
AUD Inc. GST
F-44375LK-8 K Polysulfone Compact Flow Meter with Inline Mounting
Product code: IC-F-44375LK-8
The F-44375LK-8 flow meter is made specifically for highly corrosive substances. Made from polysulfone to resist high temperatures and pressure. These meters are compact, designed to fit into tight installations. Flows from 0.1 to 1.0 GPM (0.4 to 4.0 LPM). With 1/2" pipe size, PTFE float material. Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable. This flow meter is normally priced at $302+GST!
$239.80
AUD + GST
$263.78
AUD Inc. GST
F-46010LX-08K Polysulfone Flow Meter with F/NPT Fittings and PVDF Adapter
Product code: IC-F-46010LX-08K
The F-46010LX-08K flow meter is made from polysulfone to resist high temperatures and pressure. Flows from 0.1 to 1.2 GPM (0.4 to 4.4 LPM). With 1/2" pipe size, F/NPT Fittings and PVDF adapter. Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable.
$789.70
AUD + GST
$868.67
AUD Inc. GST
F-44750L-12 Polysulfone Standard Compact Flow Meter with Inline Mounting
Product code: IC-F-44750L-12
The F-44750L-12 standard flow meter is made from polysulfone to resist high temperatures and pressure. This type of meter is compact and designed to fit into tight installations. With 3/4" pipe size. Flows from 1.0 to 10.0 GPM (5.0 to 37.5 LPM). Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable.
$289.30
AUD + GST
$318.23
AUD Inc. GST
F-44500L-8 Polysulfone Standard Compact Flow Meter with Inline Mounting
Product code: IC-F-44500L-8
The F-44500L-8 standard flow meter is made from polysulfone to resist high temperatures and pressure. This type of meter is compact and designed to fit into tight installations. With 1/2" pipe size. Flows from 0.5 to 5.0 GPM (1.8 to 18.0 LPM). Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable. This flow meter is normally priced at $339+GST!
$289.10
AUD + GST
$318.01
AUD Inc. GST
F-44376L-8 Polysulfone Standard Compact Flow Meter with Inline Mounting
Product code: IC-F-44376L-8
The F-44376L-8 standard flow meter is made from polysulfone to resist high temperatures and pressure. This type of meter is compact and designed to fit into tight installations. With 1/2" pipe size. Flows from 0.2 to 2.0 GPM (0.8 to 8.0 LPM). Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable.
$249.60
AUD + GST
$274.56
AUD Inc. GST
F-44750LE-8 Polysulfone Standard Compact Flow Meter (1.0 to 10.0 GPM/5.0 to 37.5 LPM) with Panel Mounting
Product code: F-44750LE-8
The F-44750LE-8 standard flow meters are made from polysulfone to resist high temperatures and pressure. These meters are compact, designed to fit into tight installations, with panel mounting mounting. Flows from 1.0 to 10.0 GPM (5.0 to 37.5 LPM). Pipe size of 1/2" . Ideal for corrosive environments such as Deionized water or other applications where an all plastic meter is desirable.
$339.10
AUD + GST
$373.01
AUD Inc. GST
F-461200LX-17G Polysulfone Flow Meter (2 to 20 GLM/5 to 75 LPM) with Socket Fusion Fittings and Polypropylene Adapter
Product code: F-461200LX-17G
The F-461200LX-17G flow meter is made from polysulfone to resist high temperatures and pressure. Flows from 2 to 20 GPM (5 to 75 LPM). Pipe size of 1". Ideal for UltraPure applications and corrosive environments such as Deionized water or other applications where an all plastic meter is desirable.
$709.60
AUD + GST
$780.56
AUD Inc. GST
F-40375LK-6 K Series Flow Meter (0.1 to 1.0 GPM/0.4 to 4.0 LPM)
Product code: F-40375LK-6
The F-40375LK-6 flowmeter is specifically designed for highly corrosive substances. Flows from 0.1 to 1.0 GPM ( 0.4 to 4.0 LPM ). Adapter size of 3/8" F/NPT . Made from the highest quality of acrylic with permanent scales are printed onto the flowmeter's body for easy reading. Made with PTFE float material.
$359.40
AUD + GST
$395.34
AUD Inc. GST
In-Line Flowmeter - Compressed Air & Nitrogen (3/8 Npt)
Product code: IC-5100-03-20
The CDI 5100 extends the capability of the CDI 5000 series to the low flow rates found in many point-of-use applications.
$1,249.50
AUD + GST
$1,374.45
AUD Inc. GST
Cdi5450 Hot Tap Flowmeter For Steel Pipes (6")
Product code: IC-5450-60S
The CDI 5450 is a modified version of the 5400 model that allows installation under pressure. It incorporates two valves through which the probes pass and a muffler that collects chips from the drilling process.
$5,749.30
AUD + GST
$6,324.23
AUD Inc. GST
Cdi5400 Flow Meter For Steel Pipes (8")
Product code: IC-5400-80S
The CDI 5400 clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the digital display indicates flow directly, with no setup or adjustment.
$5,479.80
AUD + GST
$6,027.78
AUD Inc. GST
Cdi5400 Flow Meter For Steel Pipes (6")
Product code: IC-5400-60S
The CDI 5400 clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the digital display indicates flow directly, with no setup or adjustment.
$4,499.00
AUD + GST
$4,948.90
AUD Inc. GST
Cdi5400 Flow Meter For Steel Pipes (5")
Product code: IC-5400-50S
The CDI 5400 clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the digital display indicates flow directly, with no setup or adjustment.
$4,499.70
AUD + GST
$4,949.67
AUD Inc. GST
Cdi5400 Flow Meter For Steel Pipes (3")
Product code: IC-5400-30S
The CDI 5400 clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the digital display indicates flow directly, with no setup or adjustment.
$2,489.30
AUD + GST
$2,738.23
AUD Inc. GST
Cdi5400 Flow Meter For Steel Pipes (2.5")
Product code: IC-5400-25S
The CDI 5400 clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the digital display indicates flow directly, with no setup or adjustment.
$2,119.80
AUD + GST
$2,331.78
AUD Inc. GST
Cdi5400 Flow Meter For Copper Pipes (4")
Product code: IC-5400-40C
The CDI 5400 clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the digital display indicates flow directly, with no setup or adjustment.
$3,219.20
AUD + GST
$3,541.12
AUD Inc. GST
Cdi5400 Flow Meter For Copper Pipes (3")
Product code: IC-5400-30C
The CDI 5400 clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the digital display indicates flow directly, with no setup or adjustment.
$2,489.60
AUD + GST
$2,738.56
AUD Inc. GST
Cdi5400 Flow Meter For Copper Pipes (2.5")
Product code: IC-5400-25C
The CDI 5400 clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the digital display indicates flow directly, with no setup or adjustment.
$2,119.20
AUD + GST
$2,331.12
AUD Inc. GST
Cdi5400 Flow Meter For Copper Pipes (2")
Product code: IC-5400-20C
The CDI 5400 clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the digital display indicates flow directly, with no setup or adjustment.
$1,599.20
AUD + GST
$1,759.12
AUD Inc. GST
Cdi5400 Flow Meter For Aluminum Pipes (76 Mm)
Product code: IC-5400-76M
The CDI 5400 clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the digital display indicates flow directly, with no setup or adjustment.
$2,489.60
AUD + GST
$2,738.56
AUD Inc. GST
Cdi5400 Flow Meter For Aluminum Pipes (63 Mm)
Product code: IC-5400-63M
The CDI 5400 clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the digital display indicates flow directly, with no setup or adjustment.
$2,119.20
AUD + GST
$2,331.12
AUD Inc. GST
Cdi5400 Flow Meter For Aluminum Pipes (50 Mm)
Product code: IC-5400-50M
The CDI 5400 clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the digital display indicates flow directly, with no setup or adjustment.
$1,599.20
AUD + GST
$1,759.12
AUD Inc. GST
Cdi5400 Flow Meter For Aluminum Pipes (101Mm)
Product code: IC-5400-101M
The CDI 5400 clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the digital display indicates flow directly, with no setup or adjustment.
$3,219.60
AUD + GST
$3,541.56
AUD Inc. GST