How To Set Up The TPS Aqua-CPA Conductivity-TDS-temp and pH Water Tester
The Aqua-CPA is a robust and accurate all-in-one meter for measuring pH, conductivity, TDS, salinity and temperature. The device features an array of user-adjustable options so that you can tailor the multiparameter meter to suit your unique application.
Figure 1 Watch an Instrument Choice Scientist demonstrate how to set up the TPS Aqua-CPA Conductivity-TDS-temp and pH Water Tester here.
How To Set Up The TPS Aqua-CPA Conductivity-TDS-temp and pH Water Tester
Button Functions
Below the 24-character LCD screen, there are five easy to navigate buttons. These are:
- CAL: The CAL button is used to calibrate all parameters and select buffers for automatic buffer recognition setup.
- MODE: Pressing MODE switches between conductivity, TDS or salinity, pH and temperature display combinations.
- UP and DOWN selector keys: These selector keys are used to move through the setup selections.
- ON/OFF: The ON/OFF key powers the unit on or off and invokes battery saver mode setup.
Conductivity/TDS/Salinity Mode Selection
- Press the MODE key until "COND" and the up and down arrows display on the LCD.
- Use the arrow keys to select between conductivity, TDS or salinity measuring mode.
- When your required measurement mode is on the screen, press MODE again. If salinity or conductivity are selected, the device will return to measurement mode. If TDS is selected, you will need to choose a TDS conversion factor.
To set the TDS conversion factor:
-
- Use the up and down selector keys to adjust the TDS conversion factor.
- When your required conversion factor is on the display, press MODE to confirm, the device will automatically return to measurement mode.
Display Combination Selection
Table 1 (below) outlines the available display combinations on the Aqua-CPA conductivity and pH water tester.
|
Conductivity, TDS and Temperature |
Conductivity and Temperature |
|
TDS, pH and temperature |
TDS and Temperature |
|
Salinity, pH and temperature |
Salinity and Temperature |
|
pH and temperature |
Temperature only |
To cycle through the available display selections, press the MODE key. Note: If no conductivity probe is connected, manual temperature setting will be indicated by an "m" on the LCD.
How To Turn The Battery Saver Function ON/OFF
If no buttons are pressed for five minutes, the unit will beep, and the display will blink for 20 seconds before automatically shutting off. This function can be disabled for continuous use.
- Start with the Aqua-CPA switched on.
- Press and hold the ON/OFF key for three seconds.
- The battery saver menu will display.
- Use the up and down arrow keys to turn the battery saver function on or off.
- When your required function is displayed, press MODE to confirm your selection.
Conclusion
Easy to navigate with a customisable display combination, the Aqua-CPA conductivity and ph water tester is a powerful, robust and convenient tool for water quality measurement.
For more information on the Aqua-CPA Conductivity-TDS-temp and pH water tester, see the links below or contact us!
Additional links
- The AQUA-CPA Conductivity-TDS-temp-pH water tester is available with three pH and conductivity sensor cable lengths.
- Browse the full range of smart, Australian-made water testers by TPS here.
- Watch "How To Setup The TPS Aqua-CPA Conductivity-TDS-Temp-ph water tester" again
- Want to see what comes in the box? Watch a scientist "Unboxing the TPS Aqua-CPA Conductivity-TDS-Temp-pH Water Tester."
Also interesting
Multi-channel data loggers allow for simultaneous temperature monitoring of several points. Multi-point monitoring provides a comprehensive overview of overall temperature and facilitates temperature comparison calculations.
The Center521 is a Bluetooth-enabled data logger thermometer that supports K, J, E, T, N, R, S types of thermocouple probes. The Center521 has several user-configurable features and functions, making it a highly versatile temperature monitoring tool.
Portable and professional summarise the TN400 portable turbidity meter designed for reliable measurements from 0 to 1000 NTU. The TN400’s kit is supplied with everything required to calibrate to four NTU points so that you can take very accurate and repeatable turbidity measurements.
Click here to learn how you calibrate a TN400 turbidity meter
