CANEDGE 2: 2x CAN BUS Data Logger with WiFi
Product code: IC-CANEdge-2
The plug & play 2xCAN/LIN logger records timestamped CAN data (Classical/CAN FD) to the extractable 8 GB industrial SD card. The small device connects via WiFi access points (e.g. WLAN or 3G/4G routers) to securely push data to your server. Further, global fleets can easily be managed via over-the-air firmware & config updates.
$959.40
AUD + GST
$1,055.34
AUD Inc. GST
1 in stock
CANEDGE 1: 2x CAN BUS Data Logger
Product code: IC-CANEdge-1
The plug & play 2xCAN/LIN logger records timestamped CAN data (Classical/CAN FD) to the extractable 8 GB industrial SD card.
$639.50
AUD + GST
$703.45
AUD Inc. GST
CL1000 CAN BUS LOGGER (8 GB) - IC-CL-1000-8GB
Product code: IC-CL-1000-8GB
The CL1000 is a simple-to-use, configurable & powerful stand-alone CAN-bus analyzer. It is both a data logger with SD card (8 GB) and a CAN interface.
$399.60
AUD + GST
$439.56
AUD Inc. GST
CL2000 CAN BUS LOGGER with Real-time Clock (8 GB)
Product code: IC-CL-2000-8GB
The CL2000 is a simple-to-use, configurable & powerful stand-alone CAN-bus analyzer. It is both a data logger with SD card and a CAN interface with real-time clock with 8 GB memory.
$499.80
AUD + GST
$549.78
AUD Inc. GST
CL2000 CAN BUS LOGGER with Real-time Clock (32 GB)
Product code: IC-CL-2000-32GB
The CL2000 is a simple-to-use, configurable & powerful stand-alone CAN-bus analyzer. It is both a data logger with SD card and a CAN interface with real-time clock with 32 GB memory.
$639.30
AUD + GST
$703.23
AUD Inc. GST
CL1000 CAN BUS LOGGER (32 GB) - IC-CL-1000-32GB
Product code: IC-CL-1000-32GB
The CL1000 is a simple-to-use, configurable & powerful stand-alone CAN-bus analyzer. It is both a data logger with SD card (32 GB) and a CAN interface.
$539.10
AUD + GST
$593.01
AUD Inc. GST
DB9 TO OBD2 CONNECTOR CABLE (1.5 m)
Product code: ICIC-CSS-DB9-OBD2
Connect the CLX000 series to the OBD2 pin out of e.g. your car for use in logging or streaming CAN bus or OBD2 data.
$89.70
AUD + GST
$98.67
AUD Inc. GST
DB9 TO J1939 CONNECTOR CABLE (1.5 m)
Product code: IC-CSS-DB9-J1939
Connect the CLX000 series loggers to J1939 interfaces - for use in e.g. trucks, buses and other commercial automotives.
$89.10
AUD + GST
$98.01
AUD Inc. GST
1 in stock
DB9 TO GENERIC CONNECTOR CABLE
Product code: IC-CSS-DB9-GEN
This adaptor cable lets you easily connect the CLX000 to custom applications.
$89.70
AUD + GST
$98.67
AUD Inc. GST
DB9-DB9/DB9 - Y-Splitter (1x Male & 2x Female)
Product code: DB9-DB9-DB9
This low cost DB9 (D-sub 9) Y-splitter cable lets you easily split a single CAN bus DB9 connector into two connectors. This is achieved via the quality over molded male-to-female/female DB9 connectors. The DB9-DB9/DB9 adapter is ideal for connecting multiple CAN devices to a single port - or e.g. daisy chaining CAN modules.
$89.80
AUD + GST
$98.78
AUD Inc. GST
![M12-to-DB9 5-Pin Adapter Cable [NMEA 2000, CANopen]](/media/cache/attachment/filter/product_large/ca048c1dad6aff04975c90c926869a37/127648/61ef49dd51e14183446733.png.webp)
M12-to-DB9 5-Pin Adapter Cable [NMEA 2000, CANopen]
Product code: DB9-M12
This 1.5 meter DB9 to M12 (5-pin) adapter fits most marine vessels and CANopen assets - and lets you easily connect your CANedge/CLX000 CAN logger to start recording CAN bus data.
$89.30
AUD + GST
$98.23
AUD Inc. GST
5 in stock
DB9 Mini Gender Changers (Female + Male, CAN Bus)
Product code: Gender-Changers
Convert a DB9 female port to a male port and vice versa. Allows you to connect your CANedge/CLX000 CAN logger to another male DB9 connector. In this case you'd need a DB9 F/F gender changer.
$89.80
AUD + GST
$98.78
AUD Inc. GST
DB9-DB9 Extension Cable (3M, CAN Bus)
Product code: DB9-DB9-3M
With this 3 meter low cost DB9 female to DB9 male connector cable, you'll be able to easily extend your CAN bus system or connect your CAN logger to a difficult-to-reach location. The cables are non-terminated, letting you combine multiple together.
$89.60
AUD + GST
$98.56
AUD Inc. GST
DC to Cigarette Outlet Adapter
Product code: Cigarette-DC
With this DC male connector and our DB9-to-DB9/DC adaptor, you can easily power e.g. your CANedge/CLX000 CAN logger via your car's cigarette lighter (in case your CAN bus does not provide a direct power supply). It can also be used if you want to log data via a CANCrocodile, powering your installation via your cigarette outlet.
$51.00
AUD + GST
$56.10
AUD Inc. GST
DB9 to DB9/DC Power Splitter
Product code: DB9-DB9-DC
With the DB9-to-DB9/DC power splitter, you'll be able to power e.g. your CAN logger via a power outlet, battery or e.g. cigarette receptacle. The DC female connector is a standard 5.5 mm (ID, inner diameter) x 2.1 mm (CPD, center pin diameter). The adaptor is great for test setups, machine logging or vehicles where no power is provided by the DB9 connector (or you prefer not to use the CAN bus power supply).
$89.60
AUD + GST
$98.56
AUD Inc. GST
CANEDGE Accessory - WiFi Rooftop Antenna (SMA, 3M Cable)
Product code: CSS-WiFI
WiFi Rooftop Antenna extends the range of your CANEdge data logger. The WiFi SMA antenna of the CANedge2 can be easily disconnected - letting you e.g. add this rooftop SMA antenna.
$51.00
AUD + GST
$56.10
AUD Inc. GST
CAT-to-DB9 Adapter Cable (Deutsch 9-Pin, Caterpillar)
Product code: DB9-CAT
This 1.5 meter CAT-to-DB9 deutsch 9-pin adapter fits most Caterpillar heavy duty vehicles and lets you easily connect your CANedge/CLX000 CAN logger to start recording J1939 data.
$89.10
AUD + GST
$98.01
AUD Inc. GST
3 in stock
CANmod.input: 8 x Analog/Digital/Pulse to CAN Bus Converter
Product code: CANmod.input
This sensor-to-CAN module produces analog, digital & pulse measurements from 8 input channels - and outputs the data via CAN bus. The module is 100% standalone, no PC required.
$539.60
AUD + GST
$593.56
AUD Inc. GST
![CANmod.temp: 4 x Thermocouple-to-CAN [Temperature Sensor]](/media/cache/attachment/filter/product_large/ca048c1dad6aff04975c90c926869a37/127622/61ee13ef7cbe9625321350.png.webp)
CANmod.temp: 4 x Thermocouple-to-CAN [Temperature Sensor]
Product code: CANmod.temp
This thermocouple-to-CAN module produces temperature data from 4 thermocouple sensors and outputs it via CAN bus. The module is 100% standalone - no PC required. -The module supports all thermocouple types (B, E, J, K, N, R, S, T) and can be daisy-chained for 8, 12, 16, ... channels.
$469.80
AUD + GST
$516.78
AUD Inc. GST
CANmod.gps: GPS-to-CAN with 3D Inertial Sensor and UDR
Product code: CANmod.gps
This standalone GPS-to-CAN module produces GNSS position and 3D inertial data (via a gyroscope & accelerometer) and outputs it via configurable CAN bus frames.
$369.80
AUD + GST
$406.78
AUD Inc. GST
![J1939 DBC File - PGN & SPN Data [2020-03]](/media/cache/attachment/filter/product_large/ca048c1dad6aff04975c90c926869a37/110241/60765f3993e11103510070.png.webp)
J1939 DBC File - PGN & SPN Data [2020-03]
Product code: J1939
The SAE J1939 DBC file contains decoding rules for scaling raw J1939 data to 'physical values' (km/h, %, degC, ...). -DBC is a CAN database format used in most CAN tools - incl. our CAN logger software. -This download includes a legal J1939 DBC file & license, based on the J1939 Digital Annex. We offer this in collaboration with SAE.
$859.40
AUD + GST
$945.34
AUD Inc. GST
CANEDGE 2: 2x CAN BUS Data Logger with WiFi (32 GB)
Product code: IC-CANEDGE-2-32GB
The plug & play 2xCAN/LIN logger records timestamped CAN data (Classical/CAN FD) to the extractable 32 GB industrial SD card. The small device connects via WiFi access points (e.g. WLAN or 3G/4G routers) to securely push data to your server. Further, global fleets can easily be managed via over-the-air firmware & config updates.
$1,099.00
AUD + GST
$1,208.90
AUD Inc. GST
DB9-USB Power Adapter Cable
Product code: DB9-USB
The CANedge2 lets you power a USB 3G/4G hotspot directly via the 2nd port (channel 2) using this DB9-USB adapter cable and upload your data via 3G/4G to your server.
CL3000 CAN BUS LOGGER with Real-time Clock and WiFi
Product code: IC-CL-3000
The CL3000 is a simple-to-use, configurable & powerful stand-alone CAN-bus analyzer. It is both a WiFi data logger with SD card and a wired CAN interface with a real-time clock.