Data Loggers
Monnit ALTA AA Wireless Accelerometer - Tilt Sensor - IC-MNS2-4-W2-AC-TL
Product code: IC-MNS2-4-W2-AC-TL
ALTA wireless accelerometers can be used in a host of applications where knowing impact, vibration, inclination, etc. is required.
$322.00
AUD + GST
$354.20
AUD Inc. GST
Monnit ALTA AA Wireless Accelerometer - Impact Sensor
Product code: IC-MNS2-4-W2-AC-IM
The wireless accelerometer - Impact Detection sensor activates when g-forces are exceeded by a user defined threshold up to 8 g-force. The user can key in the desired threshold for the g-force trigger.
$322.00
AUD + GST
$354.20
AUD Inc. GST
Monnit ALTA AA Wireless Accelerometer - G-Force Snap Shot Sensor
Product code: IC-MNS2-4-W2-AC-GS
ALTA wireless accelerometers can be used in a host of applications where knowing impact, vibration, inclination, etc. is required.
$322.00
AUD + GST
$354.20
AUD Inc. GST
Moisture and temperature sensor with 2 meter connection cable - IC-12032
Product code: IC-12032
Moisture and temperature sensor with 2 meter connection cable. Powered by humimeter RH2, relative humidity 0 to 100 % rh, calibration 10 to 90 % +/- 2.0 % RH (at 25 C), temperature range - 20 to + 85 C / -4 to 185 F, calibration +/- 0.3 C (at 25 C), rapid conditioning
$539.70
AUD + GST
$593.67
AUD Inc. GST
$975.00
AUD + GST
$1,072.50
AUD Inc. GST
4 in stock
MN13 AMMETER CLAMP - IC-4AR10RP
Product code: IC-4AR10RP
The MN13 ammeter clamp can be used on all analyzers of the NanoVIP family for the measurement of alternating currents up to 200 A; it is equipped with an automatic recognition system by the analyzer which makes its setting very simple.
$528.00
AUD + GST
$580.80
AUD Inc. GST
Monnit ALTA AA Wireless AC Current Meters (20A) - IC-MNS2-4-W2-CM-20A
Product code: IC-MNS2-4-W2-CM-20A
ALTA wireless AC Current Meter (20 A) measure the RMS current of an alternating current (AC) system using a current transformer (CT).
$434.00
AUD + GST
$477.40
AUD Inc. GST
Monnit ALTA AA Wireless AC Current Meters (150A) - IC-MNS2-4-W2-CM-150A
Product code: IC-MNS2-4-W2-CM-150A
ALTA wireless AC Current Meters (150A) measure the RMS current of an alternating current (AC) system using a current transformer (CT).
$492.00
AUD + GST
$541.20
AUD Inc. GST
Monnit ALTA AA Wireless 0-20mA Sensor - IC-MNS2-4-W2-MA-020
Product code: IC-MNS2-4-W2-MA-020
Monnit wireless 0-20mA current meters are capable of measuring the current off another device or sensor, up to 20mA (DC), by connecting the leads of the sensor to the positive and ground terminals of the device being measured.
$359.00
AUD + GST
$394.90
AUD Inc. GST
Monnit ALTA AA Pulse Counter Sensor - IC-MNS2-4-W2-PC-01
Product code: IC-MNS2-4-W2-PC-01
The Monnit ALTA Pulse counter will count the accumulated dry contact pulses from sensors like flow meters and kWh meters.
$359.00
AUD + GST
$394.90
AUD Inc. GST
Monnit ALTA AA Accelerometer G-Force Max-Avg
Product code: IC-MNS2-4-W2-AC-GM
Monnit wireless accelerometers can be used in a host of applications where knowing impact, vibration, inclination, etc. is required.
$322.00
AUD + GST
$354.20
AUD Inc. GST
ML3 ThetaProbe Soil Moisture Sensor - IC-ML3T
Product code: IC-ML3T
With the ML3 ThetaProbe Soil Moisture Sensor it’s easy to make reliable, accurate soil moisture measurements. Simply insert the soil moisture probe into the soil, connect to your data logger or readout unit, provide 5-14 V DC at 18 mA, and within seconds you can be logging soil moisture.
$950.00
AUD + GST
$1,045.00
AUD Inc. GST
Lux Probe For Monitoring Light-Sensitive Exhibition Objects
Product code: IC-0572-2158
Monitor light-sensitive exhibition objects discreetly (with the corresponding data logger): with the digital lux probe with plug-in cable.
$439.50
AUD + GST
$483.45
AUD Inc. GST
Lux & Uv Probe For Monitoring Light-Sensitive Exhibition Objects
Product code: IC-0572-2157
Monitor light-sensitive exhibition objects discreetly (with the corresponding data logger): with the digital lux and UV probe with plug-in cable.
$649.10
AUD + GST
$714.01
AUD Inc. GST
Additional Sensor Pack for Mains power Monitor with USB Interface
Product code: MS-6166
Extra sensors for MS-6165/67 for 3-phase systems.
$92.857
AUD + GST
$102.14
AUD Inc. GST
LF_TB 120 Precision moisture and temperature plug-in sensor for material moisture - IC-12004
Product code: IC-12004
LF_TB 120 Precision moisture and temperature plug-in sensor for material moisture, sensor head 0.3 m stainless tube with steel sinter cap and 2 meter connection cable powered by humimeter RH2
$1,129.70
AUD + GST
$1,242.67
AUD Inc. GST
Light Sensor Level - IC-M-LLA
Product code: IC-M-LLA
Simply drop the light sensor level over the PAR or solar radiation sensor to determine if the sensor is level. Purchase one for use on any number of light sensors.
$149.20
AUD + GST
$164.12
AUD Inc. GST
Light Sensor Bracket - IC-M-LBB
Product code: IC-M-LBB
The light sensor bracket is designed for use with tripods, masts, or flat surfaces. Use to avoid obstructions and shadows that could affect your PAR or solar radiation measurements. Includes leveling screws.
$149.20
AUD + GST
$164.12
AUD Inc. GST
LogBox Connect BLE Magnetic Mounting Plate
Product code: IC-NOD-0101
LogBox Connect BLE Magnetic Mounting Plate allows you to easily mount the datalogger to a steel plate.
$60.50
AUD + GST
$66.55
AUD Inc. GST
LM34CAZ Silicon Temperature Sensor
Product code: IC-LM34CAZ
The LM34CAZ is ideal for cold-junction compensation(CJC) temperature measurements. Customers who are using thermocouples on an external CB37 terminal board can wire this sensor to a nearby analog input, and correlate the CJC offset within software.
$25.00
AUD + GST
$27.50
AUD Inc. GST
LJTick RelayDriver
Product code: IC-LJTick-RelayDriver
Allows 2 digital I/O lines to each control a relay or other moderate load. The 4-pin design plugs into the standard DIO/DIO/GND/VS screw terminal block found on LabJacks such as the U3, U6, UE9, T7, and T4. Each DIO controls a switch to ground (i.e. open-collector) that can hold off up to 50 volts and can sink up to 200 mA.
$35.00
AUD + GST
$38.50
AUD Inc. GST
LJTick Proto
Product code: IC-LJTick-Proto
The LJTick-Proto (LJTP) consists of an 8x8 grid of holes for prototyping custom signal-conditioning ticks. The 4-pin design plugs into the standard AIN/AIN/GND/VS screw terminal block found on LabJacks such as the U3, U6, UE9, T7, and T4. Includes 3 loose pieces: the PCB, a 4-position screw terminal, and a right-angle pin header.
$20.00
AUD + GST
$22.00
AUD Inc. GST
LJTick OutBuff
Product code: IC-LJTick-OutBuff
Increases the output current of the DAC outputs on LabJack devices. Can also be used for switched 3.3V when attached to a 3.3V digital I/O line. LabJack devices cannot output more than about 15mA on their DAC0 and DAC1 analog outputs, so this accessory is very helpful for users who want to increase that capability. One common application is to control the speed of a low voltage DC motor.
$45.00
AUD + GST
$49.50
AUD Inc. GST
LJTick LVDigitalIO
Product code: IC-LJTick-LVDigitalIO
A bidirectional logic shifting board for converting 3.3V logic down to 2.5V or 1.8V. There is also a VOUT terminal which can source power at the selected voltage. Useful for users who have external boards that run on lower logic thresholds, or simply want a 3.3V, 2.5V, or 1.8V supply.
$45.00
AUD + GST
$49.50
AUD Inc. GST
LJTick InBuff
Product code: IC-LJTick-InBuff
Very low bias current (1pA) input buffer which can directly measure pH sensors (electrode type sensors) and other weakly driven or high source impedance signals. The analog inputs on our compatible DAQ products (U3, U6, UE9, T7, T4) have typical bias currents on the order of 20 nA, which is quite low, but the LJTick-InBuff reduces that dramatically.
$89.00
AUD + GST
$97.90
AUD Inc. GST
LJTick InAmp
Product code: IC-LJTick-InAmp
Signal-conditioning module provides two instrumentation amplifiers ideal for low-level signals such as bridge circuits (e.g. strain gauges) and thermocouples. Each amplifier converts a differential input to single-ended.
$169.00
AUD + GST
$185.90
AUD Inc. GST
LJTick DAC
Product code: IC-LJTick-DAC
Provides a pair of 14-bit analog outputs with a range of +/- 10 volts. Plugs into any digital I/O block (e.g. FIO4/FIO5), and thus up to 10 of these can be used per LabJack to add 20 analog outputs. Works with T-Series devices (T7, T4) and any UD family device (U3/U6/UE9).
$179.00
AUD + GST
$196.90
AUD Inc. GST
LJTick CurrentShunt
Product code: IC-LJTick-CurrentShunt
The LJTick-CurrentShunt (LJTCS) is a signal-conditioning module designed to convert a 4-20 mA current loop input signal into a 0.47-2.36 volt signal compatible with the LabJack U3, U6, UE9, T7, or T4. The 4-pin design plugs into the standard AIN/AIN/GND/VS screw terminal block found on LabJacks such as the U3, U6, UE9, T7, and T4.
$120.00
AUD + GST
$132.00
AUD Inc. GST
HOBO Water Level Logger Starter Kit 4 Meter - KIT-S-U20-04
Product code: KIT-S-U20-04
Combining high accuracy water level measurements with out-of-the-box convenience, this kit includes everything needed to start logging right away in wells, streams, lakes and freshwater wetlands
$1,819.50
AUD + GST
$2,001.45
AUD Inc. GST
KILOG software with USB interface for KIMO KILOG Data Loggers - KIC2-N
Product code: KIC2-N
KILOG software with USB interface for KIMO KILOG Data Loggers enables you to configure, save and process your data in a very simple way.
$189.40
AUD + GST
$208.34
AUD Inc. GST